Quality York NY septic system installers do a number of legwork, long before a unit gets placed into the ground. A brand new unit will last decades, and possibly even generations, if it’s placed the right way, but it can fall short instantly if it’s not. Furthermore, all York NY septic system installers must obtain a permit in order to do the install, and may have to partner with city or county officials to show that specific tests were run in order to progress. These three assessments are vital primary steps that should always be taken before any job or designs are done, and it may also be helpful to perform them before you acquire a property, so you can be assured that a tank and leach field will be permitted.
[dyna dynami=”Template 6″]
1. Pit
The pit test is very uncomplicated. During the course of this test, a hole is excavated and the soil is analyzed to establish its structure. A standard leach field is dependent on the soil’s composition to drain effectively. If there is a considerable amount of gravel or sand, your leach field should be capable to discharge the effluent (water) from the tank well, where the soil will finish cleaning it. If the soil has a considerable amount of clay or rock, it won’t sink well, and so a conventional leach field will not be an option. If the location you’ve chosen does not pass the pit test, you may be able to choose another site on your property or use an alternate kind of drain field, like a mound system.
2. Perc
The perc, or percolation test, requires excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is typically left saturated for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are many things an inspector will check visually. The majority of units are gravity-fed, so they don’t rely upon electricity or pumps to transfer effluent from the tank to the leach field. Because of this, the slope of the ground is very important. An inspector will also try to find inclines that could feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Enlist the Services of Quality York NY Septic System Installers Now
Choosing the right configuration, style of system, and evaluating the land properly, are all fundamental steps in making sure an install goes off without a hitch. Most significantly, these steps guarantee that the install is done properly, so that a system provides years of use without problems. If you’re preparing for an install, call Septic Tank Pros Rochester NY. Our partner service technicians are knowledgeable and devoted to quality, so you can be sure the job is done right. Call (585) 286-5361 right now.